Messy cut

Hello,
The cutting time is very long, I have the impression that it is linked to the cutting which is messy, the robot spends a lot of time fixing the holes it leaves. In the end everything is well mowed but it does not seem optimal, is this normal?

Dear MB043953,

Regarding your question about A2, we recommend：

Hello! If the mowing speed is slow, you can adjust it by following the steps below:

You can select the mowing efficiency on the APP or the robot's control pannel: Standard and Efficiency.
1. In Standard mode, the walking speed is lower (0.35m/s), which is recommended when you need precise mowing. In Standard mode, the robot is capable of mowing approximately 150 square meters per hour (cutting 1cm of grass) in an open environment.
2. In Efficiency mode, the walking speed is higher (0.6m/s), which is recommended when you need to mow quickly. In Efficiency mode, the robot is able to mow approximately 200 square meters per hour (cutting 1cm of grass) in an open environment.
3. You can also set different mowing modes for different areas as needed.
Warm Tips: The above data were tested in the standard environment of Dreame laboratory, and the actual data may be different according to different grass conditions

If you need further assistance, please provide your service ticket number or contact us via me > Help & Feedback > Contact us > Online Customer Service.

j'ai moi même ce problème de trou dans la tonte, il lui arrive également de repasser là où il a déja tondu apres s'être rechargé