Maintaince of the Tri-Cut Generation 2.

Maintenance of the Tri-Cut Generation 2 of Dreame:

First, remove the roll brush cover on the robot. Then, remove the Tri-Cut roll brush and clean any hair from the brush. Next, unplug the square end cover and remove the rubber strips. Use a small brush to clean the gaps.

Important! The main body must not be washed with water. However, the rubber strips can be washed. After cleaning, reinst

If unable to play, please click here to open in a new window

all the rubber strips. These strips are a cost-effective part and should be replaced every 6 months.

Finally, reinstall the brush and cover.

Here you can chek the video.
https://community.heyupnow.com/d/5412-instruction-how-to-maintenance-the-tri-cut-generation-2-from-dreame

Nous avons dû faire plus que cela car la lame ne bouchait plus. Nous avons dû démonter complètement la brosse car le petit système d'engrenage faisant osciller la lame était sorti de son emplacement