Low water consumption

Recently, the robot has started using significantly less clean water. Previously, cleaning 100 square meters would consume almost the entire water tank, but now it only uses about 1/5 of the tank.

Is this related to a software update, or could the nozzles be clogged?

When the robot mops the floor, the roller is wet, but the water consumption is significantly lower than before.

Hello,

Regarding the issue you reported, we recommend trying the following steps and monitoring whether the situation improves:

Increase the roller mop moisture level in the app.
Increase the frequency of automatic mop washing.
Replace the roller mop regularly and clean the wastewater suction filter inside the robot.

In addition, we recommend enabling automatic firmware updates so that you can continue to benefit from the latest performance optimizations and cleaning improvements. To do this, open the app, tap the three dots ("...") in the top-right corner, then scroll down and select Firmware Update to view and adjust the settings.

We hope these suggestions are helpful.